Self-supporting lattice towers, guyed masts, rooftop structures and monopoles — fabricated to IS 2062 and hot-dip galvanized in our own 7-metre kettle.
Indo East Corporation has been a trusted supplier of telecom towers and antenna structures to India's leading telecom operators for over two decades. Our towers serve Reliance Jio, Airtel, BSNL, Vodafone, Ericsson, ATC/Altius, and TCIL — with thousands of structures installed across India's network infrastructure.
All telecom structures are fabricated from IS 2062 / IS 2502 structural steel, hot-dip galvanized to IS 2629 / ASTM A123 standards, and designed to withstand wind loads as per IS 875 Part 3. Custom designs available for any terrain or wind zone.
| Parameter | Specification |
|---|---|
| Tower Types | Self-Supporting, Guyed Mast, Rooftop, Monopole |
| Height Range | 18m – 100m+ (custom heights available) |
| Material | IS 2062 Grade A / Grade B Structural Steel |
| Galvanizing Standard | IS 2629 / ASTM A123 (75–85 microns coating) |
| Wind Zone Compliance | IS 875 Part 3 — Wind Zones I to V |
| Design Support | Structural drawings & analysis available |
| Certifications | ISO 9001:2015 Quality Assured |
Three-legged and four-legged lattice towers up to 100m for mobile base stations.
Cost-efficient tall masts with guy wire support for rural / greenfield sites.
Lightweight rooftop poles and frames for urban antenna installations.
Aesthetically designed tubular monopoles for urban and highway deployments.
Self-supporting lattice towers (three-legged and four-legged), guyed masts, rooftop structures and tubular monopoles. Standard height range is 18 m to 100 m and above, and custom heights are fabricated to the client's GA drawing.
Towers are fabricated from IS 2062 Grade A / Grade B structural steel (IS 2502 where applicable) and hot-dip galvanized to IS 2629 / ASTM A123 with a coating thickness of 75-85 microns.
Yes. Structural design follows IS 875 Part 3 and covers Wind Zones I to V. Designs can be adapted to any terrain category or wind zone on request.
In-house. Indo East operates its own hot-dip galvanizing plant with a 7-metre kettle (7 m x 1.2 m x 1.6 m) on the same Howrah site as the fabrication shop, so fabrication tolerance and zinc coating are controlled by one company against one drawing.
Structures have been supplied to Reliance Jio, Airtel, BSNL, Vodafone, Ericsson, ATC / Altius and TCIL, with thousands of structures installed across Indian network infrastructure.
Yes. Drawing-based fabrication is the normal mode of working. Send the GA drawing or specification and a director replies within 48 business hours.
ISO 9001:2015 (quality), ISO 14001:2015 (environment) and ISO 45001:2018 (occupational health and safety).
The plant is at Jalan Industrial Complex, Jangalpur, on NH-6 in Howrah, West Bengal - roughly 22 km from Kolkata Port. Indo East is an IEC registered exporter and supplies knocked-down structure packages with full export documentation.